Vibration Isolators and Mounts

Bushings & Sleeves

Parker's Bushings & Sleeves are some of the most common types of parts available in the NVH market. Parker has made this type of product for many years and has a tremendous material library available to meet demanding customer applications.

 

LORD® Micro-Mounts

LORD® Micro-Mounts® provide protection from shock and vibration at the electronic board level. These are high-performance isolators small enough and soft enough to protect individual electronic components allowing isolation at the circuit board level.

 

LORD® Snubbers

LORD® Snubbers are isolators for downhole tools. Snubbers act as MWD shock absorbers to protect MWD electronics from excessive shock and vibration.

 

LORD® Softshoe Isolators​

LORD MWD Tool SoftShoe Isolators are designed for service in air, foam or mud drilling operations. The SoftShoe Isolator protects the sensitive electronics in a MWD string by isolating these components from mid-range and high-frequency vibrations.

 

LORD® Axial Isolator

LORD® Axial Isolators, or MWD shock absorbers, are specifically designed to protect Measurement While Drilling (MWD) electronics from axial shock and vibration.

 

LORD Binocular and Split Mounts for Industrial Applications

LORD binocular mounts and split mounts are designed for applications involving severe dynamic forces in the static load direction, as well as the rebound direction. Travel is limited in both directions by rubber in compression that provides snubbing.

 

 

LORD Center-Bonded Mounts for Industrial Applications

LORD center-bonded mounts isolate vibration, control shock and reduce noise due to structure borne vibrations. Available in a full range of load capacities and able to withstand shock loads of 10 g’s.

 

 

LORD Center-Bonded and Square-Bonded Bushings for Industrial Applications

Used in applications where the absorption shock, attenuation of noise, reduction of wear and elimination of lubrication is required.

 

LORD Conical Mounts for Industrial Applications​

LORD Conical Mounts provide effective vibration isolation and noise attenuation with a simple, robust mount design. Consistent performance, high load bearing capabilities and a choice of radial stiffness characteristics are key features of these mounts.

 

 

LORD Flex-Bolt™ Sandwich Mounts for Industrial Applications

LORD Flex-Bolt Sandwich Mounts are constructed with high-strength bonds and specially compounded elastomers, these mounts provide excellent capacity for energy control, high load-carrying capacity, and long life.

 

LORD Fluidlastic™ Mounts for Industrial Applications

LORD Fluidlastic mounts combine rubber and fluids to provide vibration isolation and noise reduction measurably better than conventional mounts. They also provide greater versatility because the mounts are tuned to precisely match application.​

 

LORD Grommet Isolators for Industrial Applications

LORD Grommet Isolators are effective, economical vibration isolation for light loads. They are suitable for commercial and military applications.

 

LORD Machinery Mounts for Industrial Applications

LORD Machinery Mounts are designed to support heavy equipment and isolate intermittent or continuous vibration, the result is greater machine accuracy, longer service life, smoother operation and reduced maintenance.

LORD Plateform Mounts for Industrial Applications

LORD Plateform Mounts provide effective isolation against vibration. The contour of the flexing element was developed to provide uniform stress distribution.

​

 

LORD Small Industrial Engine Mounts for Industrial Applications

LORD Small Industrial Engine Mounts are especially designed for mounting 2-, 3- and 4-cylinder gas or diesel engines in various types of vehicles and equipment.

 

LORD Surface Effect Mounts for Industrial Applications

LORD Surface Effect Mounts combine surface-effect damping principles with traditional rubber-bonded-to-metal technology. The result is a soft mount capable of providing effective damping over large deflections and a wide range of frequencies.

 

LORD Two-Piece Mounts for Industrial Applications

LORD Two-Piece Mounts are designed for applications involving severe dynamic forces in the static load direction, as well as the rebound direction. Travel is limited in both directions by rubber in compression that provides snubbing.​​​

 

LORD® Plateform Mounts for Aerospace and Defence Applications

Plateform Mounts are recommended for vibration isolation. Lightweight, compact & provide economical protection from lower frequency disturbances regardless of directions of forces. Not recommended where severe, frequently recurring shock is encountered.

 

LORD® Aft Engine Mount

A wide range of standard and custom equipment and mount solutions to meet every need. Parker Lord mounts and attachments provide the best solutions for your aircraft without compromise, resulting in lower risk and total cost for our customers.

 

LORD® Aft Fluid Engine Isolator

A wide range of standard and custom equipment and mount solutions to meet every need. Parker Lord mounts and attachments provide the best solutions for your aircraft without compromise, resulting in lower risk and total cost for our customers.

 LORD® Aft Landing Gear Cap Assembly

 ​A wide range of standard and custom equipment and mount solutions to meet every need. Parker Lord mounts and attachments provide the best solutions for your aircraft without compromise, resulting in lower risk and total cost for our customers.

 

 

LORD® Multiplane Mounts for Aerospace and Defense Applications

Multiplane Mounts are recommended for vibration isolation. Lightweight, compact & provide economical protection from lower frequency disturbances regardless of directions of forces. Not recommended where severe, frequently recurring shock is encountered.

 

 

LORD® AM-001 Series Low Profile Avionics Mount for Aerospace and Defense Applications

Our Low Profile Avionics Mounts set the standard for compact, highload, high-capacity isolators. Designed to support & protect avionics equipment in all types of aircraft. Applications include inertial guidance & navigation systems and radar components.

Other parts in this category

LORD® AM-002 - LORD® AM-003 - LORD® AM-004 - LORD® AM-005 - LORD® AM-006- LORD® AM-007 - LORD® AM-008 - LORD® AM-009

 

LORD® Aft Landing Gear Cap Bumper Pad​

 

LORD® Arm Assembly (Left Hand)

 

LORD® Arm Assembly (Right Hand)​.

 

LORD® High Deflection Mount Variation for Aerospace and Defense Applications

 

LORD® Low Profile Avionics Mount Variation for Aerospace and Defense Applications

 

LORD® Broad Temperature Range Mount for Aerospace and Defense Applications

BTR® Mounts are compact & highly efficient vibration control isolators designed to protect sensitive equipment exposed to severe dynamic conditions. For critical applications & high performance aircraft, missile, spacecraft & vehicular environments.

 

LORD® Clevis Assembly (Left Hand)

Other parts in this category

LORD® Clevis Assembly (Left Hand Pylon Support) - LORD® Clevis Assembly (Right Hand Pylon Support) - LORD® Clevis Assembly (Right Hand)

 

LORD® Corner Mount​

​

LORD® Elastomeric Spring (Forward & Aft)

 

LORD® Flexure Assembly​

 ​​​

LORD® Fluid Mount

 

LORD® Forward Landing Gear Cap

 

LORD® HT0 Series Broad Temperature Range Mount for Aerospace and Defense Applications

 

LORD® HT1/UT1 Series Broad Temperature Range Mount for Aerospace and Defense Applications

LORD® HT2/UT2 Series Broad Temperature Range Mount for Aerospace and Defense Applications

 

LORD® Helper Spring Assembly

 

LORD® High Deflection Mount for Aerospace and Defense Applications​

 

LORD® Isolation Mount (KAflex Mod)

 

LORD® Isolation Mount (Lateral)

 

LORD® Isolation Mount (Longitudinal)

 

LORD® Isolation Mount (Pylon)

 

LORD® LIVE Mount

 

 ​

LORD® MAA001 Series Miniature Mount

 

LORD® MAA002 Series Miniature Mount

 

LORD® MAA003 Series Miniature Mount

 

LORD® MAA004 Series Miniature Mount

 

LORD® MCB002 Series Miniature Mount

 

LORD® MCB003 Series Miniature Mount​

 

LORD® MCB004 Series Miniature Mount

 

LORD® MCB005 Series Miniature Mount

 

LORD® MGN/MGS001 Series Miniature Mount​

 

LORD® MGN/MGS002 Series Miniature Mount

 

LORD® MGN/MGS003 Series Miniature Mount​

 

​

LORD® MX002 Series Micro-Mount

 

LORD® MX003 Series Micro-Mount

 

LORD® Nodal Beam Support (Forward)

Other products in this range 

LORD® Nodal Beam Support (Left Hand Aft) - LORD® Nodal Beam Support (Right Hand Aft)

 

LORD® Pylon Link Assembly

 

LORD® Restraint Support Assembly​

 

LORD® Rod Ends for Turnbuckles and Luggage Bins

​

 

LORD® Rubber Bumper

​

 

LORD® Shimmy Damper

 

LORD® Shipping Container Mount

 

LORD® Tension Torsion (TT) Strap

 

LORD® Torsion Arm Assembly  (Left Hand Pylon Support)​

 

Other products in this range ​

LORD® Torsion Arm Assembly (Right Hand Pylon Support)

 

LORD® Transmission Mount

 

LORD® Transmission Restraint​

 

LORD® Tubeform

 

LORD® Upstop Stop Assembly

 

LORD® Micro Mount Variation

 

LORD® Fixed Wing Commercial Engine Mount​

LORD® Fixed Wing Commercial Engine Rod End Link Assembly

 

LORD® Fixed Wing Commercial Engine Torque Tube

 

 

 

 

 

 ​​

 

 

 ​

 

 ​

 

https://www.ashtonseals.co.uk/admin16/LORD%20binocular%20mounts%20and%20split%20mounts%20are%20designed%20for%20applications%20involving%20severe%20dynamic%20forces%20in%20the%20static%20load%20direction,%20as%20well%20as%20the%20rebound%20direction.%20Travel%20is%20limited%20in%20both%20directions%20by%20rubber%20in%20compression%20that%20provides%20snubbing.